Results 1 to 3 of 3

Thread: Hybrid Audio L3SE

  1. #1
    Tester Extraordinaire ErinH's Avatar
    Join Date
    Aug 2010
    Posts
    1,247

    Hybrid Audio L3SE

    For test setup, procedures, and information on how the data was obtained see sticky here:
    http://www.mobilesoundscience.com/f1...istortion-693/
    Do not ask setup questions in this thread. This thread is only for driver discussion.

    Driver Tested:
    Hybrid Audio L3SE





    Impedance and T/S Parameters:



    Frequency Response at 0 degrees, 3dB scale:


    Frequency Response at 0, 15, 30, and 60 degrees, 5dB scale:



    Harmonic Distortion at 89dB:


    Harmonic Distortion at 92dB:
    Your ears: The best tools you have... and they're free, too!

  2. #2
    Founding Member Subwoofery's Avatar
    Join Date
    Sep 2010
    Posts
    353
    Real Name
    Kelvin
    Not sure but from my understanding, the L3SE is a hell of a driver - distorsion and off-axis wise (except for the peak @ 8kHz)

    Kelvin
    Last edited by Subwoofery; 04-29-2011 at 08:46 PM.

  3. #3
    Devil's Advocate Adam_MSS's Avatar
    Join Date
    Aug 2010
    Posts
    1,578
    Real Name
    Adam
    Distortion plots looks pretty good. The FR plot might give me a little pause to consider placement and how to best manage the couple peaks and dips in the response, but I don't think it looks unmanageable. The drop right past 2.5khz would be my biggest concern, but it's magnitude isn't really that huge, as evidenced by the F1 distortion plot.
    You don't use science to show that you're right, you use science to become right. - R.Munroe

    The important thing in science is not so much to obtain new facts as to discover new ways of thinking about them. - W.L.Bragg



Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •